GABOR, Roman, Ladislav CVRČEK, Marie KUDRNOVA, Josef HLINKA, Marek VEČEŘ, Matěj BUŘIL, Jan WALTER, Miha CEKADA, Aljaz DRNOVSEK, Petr UNUCKA, Kateřina MAMULOVÁ KUTLÁKOVÁ, Oldřich MOTYKA and Jana SEIDLEROVÁ. ZrN coating as a source for the synthesis of a new hybrid ceramic layer.
Applied Surface Science Advances. Shannon: Elsevier, 2024,
22(August), p. nestránkováno. ISSN 2666-5239.
[Detail] GABOR, Roman, I ŠLAMBOROVÁ, Karel MAŠEK, Marek VEČEŘ, Gražyna SIMHA MARTYNKOVÁ, Josef HLINKA, Michaela TOKARČÍKOVÁ, Oldřich MOTYKA, Petr BĚČÁK and Jana SEIDLEROVÁ. Structural modification of aluminium alloy for preparation of hydrophobic and antibacterial ZnO-based coatings.
Ceramics International. Shannon: Elsevier, 2024,
50(18), p. 33751-33761. ISSN 0272-8842.
[Detail] GABOR, Roman, Ladislav CVRČEK, Karel MAŠEK, Josef HLINKA, Oldřich MOTYKA, Jan WALTER, Gražyna SIMHA MARTYNKOVÁ, Gabriela MIKESKOVÁ and Jana SEIDLEROVÁ. Tribological and corrosion properties of β-TiNb alloy modified by plasma electrolytic oxidation: Evaluation of the synergistic effect of composition and processing time through statistical evaluation.
International Journal of Refractory Metals and Hard Materials. Elsevier, 2024,
118(2024), p. 106502. ISSN 0263-4368.
[Detail] VONTOROVÁ, Jiřina, Vlastimil NOVÁK and Petra VÁŇOVÁ. Low-Carbon Steel Formed by DRECE Method with Hot-Dip Zinc Galvanizing and Potentiodynamic Polarization Tests to Study Its Corrosion Behavior.
Metals. MDPI Open Access Publishing, 2024,
14(9), p. nestránkováno. ISSN 2075-4701.
[Detail] SCHINDLER, Ivo, Petr KAWULOK, Kateřina KONEČNÁ, Michal SAUER, Horymír NAVRÁTIL, Petr OPĚLA, Rostislav KAWULOK and Stanislav RUSZ. SIMULATION OF HOT CONTINUOUS ROLLING OF A PLAIN CARBON STEEL USING THE MAXSTRAIN II® MULTI-AXIS DEFORMATION SYSTEM.
Archives of Metallurgy and Materials. Zabrze: Polish Academy of Sciences, 2023,
68(2), p. 741-747. ISSN 1733-3490.
[Detail] VODÁREK, Vlastimil, Jan HOLESINSKY, Zdenek KUBON, Renáta PALUPČÍKOVÁ, Kryštof HRADEČNÝ, Petra VÁŇOVÁ and Josef HLINKA. The Effect of Vanadium on Modified Z-Phase Characteristics in Austenitic Steels.
Crystals. BASEL: MDPI Open Access Publishing, 2023,
13(4), p. nestránkováno. ISSN 2073-4352.
[Detail] VODÁREK, Vlastimil, Zdeněk KUBOŇ, Petra VÁŇOVÁ, Renáta PALUPČÍKOVÁ and Svatopluk LANGER. Creep Resistance and Microstructure Evolution in HR3C-P92 Heterogeneous Welds.
Defect and Diffusion Forum. Uetikon-Zuerich: Trans Tech Publications, 2023, 422, p. 51-56. ISSN 1012-0386.
[Detail] KANDER, Jan, Ondřej DORAZIL and Petr JONŠTA. Influence of different heat treatments on Tsp transition temperature. Trans. .
Hutnické listy. Ocelot, 2023,
LXXVI(4-6), p. 31-34. ISSN 0018-8069.
[Detail] HEMMAT, Minoosh, Sabrine AYARI, Martin MIČICA, Hadrien VERGNET, Shasha GUO, Mehdi ARFAOUI, Xuechao YU, Daniel VALA, Adrien WRIGHT, Kamil POSTAVA, Juliette MANGENEY, Francesca CAROSELLA, Sihem JAZIRI, Qi Jie WANG, Liu ZHENG, Jérome TIGNON, Robson FERREIRA, Emmanuel BAUDIN and Sukhdeep DHILLON. Layer-controlled nonlinear terahertz valleytronics in two-dimensional semimetal and semiconductor PtSe2.
Infomat. Wiley, 2023,
5(11), p. nestránkováno. ISSN 2567-3165.
[Detail] BENDA, Vojtěch, Jan KUBÍČEK, Roman MADEJA, David OCZKA, Martin ČERNÝ and Kamila DOSTÁLOVÁ. Design of Proposed Software System for Prediction of Iliosacral Screw Placement for Iliosacral Joint Injuries Based on X-ray and CT Images.
Journal of Clinical Medicine. BASEL: MDPI Open Access Publishing, 2023,
12(6), p. nestránkováno. ISSN 2077-0383.
[Detail] JANSA, Jan, Anastasia VOLODARSKAJA, Josef HLINKA, Lucie ZARYBNICKA, Stanislav POLZER, Martin KRAUS, Jiří HAJNYŠ, David SCHWARZ and Marek PAGÁČ. Corrosion and material properties of 316L stainless steel produced by material extrusion technology.
Journal of Manufacturing Processes. San Diego: Elsevier, 2023,
88(88), p. 232-245. ISSN 1526-6125.
[Detail] SAUER, Michal, Richard FABIK, Ivo SCHINDLER, Petr KAWULOK, Petr OPĚLA, Rostislav KAWULOK, Vlastimil VODÁREK and Stanislav RUSZ. Analysis of the Microstructure Development of Nb-Microalloyed Steel during Rolling on a Heavy-Section Mill.
MATERIALS. BASEL: MDPI, 2023,
16(1), p. nestránkováno. ISSN 1996-1944.
[Detail] SITEK, Ryszard, Krzysztof KULIKOWSKI, Krystian PARADOWSKI, Kamil GANCARCZYK, Monika LOSERTOVÁ, Akira KOBAYASHI, Joanna MONETA and Janusz KAMINSKI. Influence of Ion Nitriding on Microstructure and Properties of Haynes 282 Nickel Superalloy Specimens Produced Using DMLS Technique.
MATERIALS. BASEL: MDPI, 2023,
16(14), p. nestránkováno. ISSN 1996-1944.
[Detail] VODÁREK, Vlastimil, Zdeněk KUBOŇ, Renáta PALUPČÍKOVÁ, Kryštof HRADEČNÝ and Petra VÁŇOVÁ. Creep Behaviour and Microstructure Evolution in Super 304H–P92 Heterogeneous Welds.
MATERIALS AT HIGH TEMPERATURES. 2023, p. Neuveden. ISSN 0960-3409.
[Detail] HLINKA, Josef, Kamila DOSTÁLOVÁ, Kristina ČABANOVÁ, Roman MADEJA, Karel FRYDRYSEK, Jan KOUTECKY, Zuzana RYBKOVA, Katerina MALACHOVA and Osamu UMEZAWA. Electrochemical, Biological, and Technological Properties of Anodized Titanium for Color Coded Implants.
Materials. BASEL: MDPI Open Access Publishing, 2023,
16(2), p. nestránkováno. ISSN 1996-1944.
[Detail] NAG, Akash, Madhulika SRIVASTAVA, Jana PETRŮ, Petra VÁŇOVÁ, Ashish Kumar SRIVASTAVA and Sergej HLOCH. Comparison of Continuous and Pulsating Water Jet during Piercing of Ductile Material.
Materials. BASEL: MDPI Open Access Publishing, 2023,
16(9), p. nestránkováno. ISSN 1996-1944.
[Detail] ROSYPALOVÁ, Silvie, Lenka ŘEHÁČKOVÁ, Vlastimil NOVÁK, Monika KAWULOKOVÁ, Petra VÁŇOVÁ, Kateřina KONEČNÁ and Barbora ĎURICOVÁ. Rheological Characteristics of Fe-C-Cr(Ni) Alloys.
Materials. BASEL: MDPI Open Access Publishing, 2023,
16(7), p. nestránkováno. ISSN 1996-1944.
[Detail] VOLODARSKAJA, Anastasia, Kryštof HRADEČNÝ, Renáta PALUPČÍKOVÁ, Petra VÁŇOVÁ and Vlastimil VODÁREK. Microstructure Evolution in a GOES Thin Strip.
Metals. Basilej: MDPI Open Access Publishing, 2023,
13(1), p. nestránkováno. ISSN 2075-4701.
[Detail] DRONG, Mariusz, Jan, Jr PERINA, Tibor FÖRDÖS, Henri Y JAFFRES, Kamil POSTAVA and Henri-Jean DROUHIN. Spin vertical-cavity surface-emitting lasers with linear gain anisotropy: Prediction of exceptional points and nontrivial dynamical regimes.
Physical Review A. College Park: American Physical Society, 2023,
107(3), p. nestránkováno. ISSN 2469-9926.
[Detail] VALA, Daniel, Martin MIČICA, Daniel CVEJN and Kamil POSTAVA. Broadband Mueller ellipsometer as an all-in-one tool for spectral and temporal analysis of mutarotation kinetics.
RSC Advances. Royal Society of Chemistry, 2023,
13(10), p. 6582-6592. ISSN 2046-2069.
[Detail] BROŽOVÁ, Silvie, Jaromír DRÁPALA, Jiří BROŽ and Adéla MACHÁČKOVÁ. INNOVATIVE HYDROMETALLURGY FOR GALVANIC SLUDGE SUSTAINABLE RECOVERY.
System Safety: Human - Technical Facility - Environment. Varšava: De Gruyter, 2023,
5(1), p. 45-56. ISBN 978-83-67405-70-6.
[Detail] KOLEJÁK, Pierre, Geoffrey LEZIER, Kamil POSTAVA, Jean François LAMPIN, Nicolas TIERCELIN and Mathias VANWOLLEGHEM. 360o Polarization Control of Terahertz Spintronic Emitters Using Uniaxial FeCo/TbCo2/FeCo Trilayers.
ACS Photonics. 2022,
9(4), p. 1274-1285. ISSN 2330-4022.
[Detail] LEZIER, Geoffrey, Pierre KOLEJÁK, Jean-Francois LAMPIN, Kamil POSTAVA, Mathias VANWOLLEGHEM and Nicolas TIERCELIN. Fully reversible magnetoelectric voltage controlled THz polarization rotation in magnetostrictive spintronic emitters on PMN-PT.
Applied Physics Letters. New York: American Institute of Physics, 2022,
120(15), p. nestránkováno. ISSN 0003-6951.
[Detail] FRYDRÝŠEK, Karel, Ondřej SKOUPÝ, Ivan MRKVICA, Aneta SLANINKOVÁ, Jiří KRATOCHVÍL, Tibor JURGA, Miroslav VLK, Pavel KRPEC, Roman MADEJA, Miroslav HAVLICEK, Dana STANCEKOVA, Jana POMETLOVA and Josef HLINKA. Stochastic Evaluation of Cutting Tool Load and Surface Quality during Milling of HPL.
Applied Sciences. BASEL: MDPI Open Access Publishing, 2022,
12(24), p. nestránkováno. ISSN 2076-3417.
[Detail] SEJDA, František, Karel FRYDRÝŠEK, Leopold PLEVA, Martin POMPACH, Josef HLINKA, Marek SADÍLEK, Zuzana MURCINKOVA, Pavel KRPEC, Miroslav HAVLICEK, Roman MADEJA, Jana POMETLOVA, Oldřich UČEŇ and Kamila DOSTÁLOVÁ. Numerical Analysis of the Calcaneal Nail C-NAIL.
Applied Sciences. BASEL: MDPI Open Access Publishing, 2022,
12(10), p. nestránkováno. ISSN 2076-3417.
[Detail] FRYDRÝŠEK, Karel, Tomáš HALO, Daniel ČEPICA, Vojtěch MACHALLA, Kateřina VLČKOVÁ, Ondřej SKOUPÝ, Roman MADEJA, Miroslav HAVLÍČEK, Kamila DOSTÁLOVÁ, Antonín TREFIL, Leopold PLEVA, Zuzana MURČINKOVÁ, Pavel KRPEC and Josef HLINKA. Biomechanical Assessment of Cannulated Nails for the Treatment of Proximal Femur Fractures.
Applied Sciences. Basilej: MDPI Open Access Publishing, 2022,
12(15), p. nestránkováno. ISSN 2076-3417.
[Detail] GABOR, Roman, Tomas PRYMUS, Ladislav CVRCEK, Vaclav NEHASIL, Josef HLINKA, Matej BURIL, Michaela TOKARČÍKOVÁ and Jana SEIDLEROVÁ. Final surface modification for better wear resistance of ceramic coating on cast AlSi10Mg alloy.
Ceramics International. San Diego: Elsevier, 2022,
48(24), p. 37433-37447. ISSN 0272-8842.
[Detail] MALCHARCZIKOVÁ, Jitka, Kateřina SKOTNICOVÁ, Petr KAWULOK, Rostislav KAWULOK, Ivo SZURMAN and Jana RŮŽIČKA. Preparation and Properties of Directionally Solidified Ni-Al Based Alloys Modified by Molybdenum.
Crystals. BASEL: MDPI Open Access Publishing, 2022,
12(2), p. nestránkováno. ISSN 2073-4352.
[Detail] ŘEHOŘEK, Jakub. Charakterizace minoritních fází v homogenním svarovém spoji z oceli X6CrNiNbN25-20 pocreepové expozici při teplotě 700 °C.
Energetika. Český svaz zaměstnavatelů v energetice, 2022,
72(1), p. 54-58. ISSN 0375-8842.
[Detail] SCHINDLER, Ivo, Petr KAWULOK, Petr OPĚLA, Rostislav KAWULOK, Kateřina KONEČNÁ, Michal KONDERLA, Stanislav RUSZ, Richard FABÍK and Josef NĚMEC. Laboratorní simulace spojitého válcování za tepla střídavou deformací tlakem ve dvou směrech.
Hutnické listy. Ocelot, 2022,
75(3-4), p. 17-22. ISSN 0018-8069.
[Detail] KANDER, Ladislav, Greger MIROSLAV, Jan KANDER and Petr JONŠTA. Development of the structure and properties of aluminium alloy EN AW 6082 after severe plastic deformation.
Hutnické listy. Ocelot, 2022,
LXXV(5-6), p. 48-52. ISSN 0018-8069.
[Detail] KAMYSHNYKOVA, Kateryna, Juraj LAPIN, Tatiana PELACHOVA, Tomáš ČEGAN, Jan JUŘICA and Anastasia VOLODARSKAJA. Microstructure and mechanical properties of Ti-45Al-2W-xC alloys.
Intermetallics. San Diego: Elsevier, 2022,
148(SEP 2022), p. nestránkováno. ISSN 0966-9795.
[Detail] ŘEHÁČKOVÁ, Lenka, Vlastimil NOVÁK, Petra VÁŇOVÁ, Dalibor MATÝSEK, Markéta TKADLEČKOVÁ, Kateřina KONEČNÁ, Michal SNIEGOŇ, Bedřich SMETANA, Silvie ROSYPALOVÁ, Monika KAWULOKOVÁ and Ľubomíra DROZDOVÁ. Interfacial phenomena between alumina substrate and nickel containing low-alloy steel.
Journal of Alloys and Compounds. Lausanne: Elsevier Science SA, 2022,
900(April), p. nestránkováno. ISSN 0925-8388.
[Detail] DRONG, Mariusz, Maciej DEMS, Jan, Jr PERINA, Tibor FÖRDÖS, Henri-Yves JAFFRES, Kamil POSTAVA and Henri-Jean DROUHIN. Time-Dependent Laser Cavity Perturbation Theory: Exploring Future Nano-Structured Photonic Devices in Semi-Analytic way.
Journal of Lightwave Technology. Vienna: IEEE, 2022,
40(14), p. 4735-4745. ISSN 0733-8724.
[Detail] GREGER, Miroslav, Oskar KWARTENG, Rostislav KAWULOK and Ladislav KANDER. Kování a tepelné zpracování Ti a slitin Ti.
Kovárenství. Svaz kováren ČR, 2022,
75(březen), p. 18-25. ISSN 1213-9289.
[Detail] ČEGAN, Tomáš, Kateryna KAMYSHNYKOVA, Juraj LAPIN, Ivo SZURMAN, Jan JUŘICA and Vendula KLIMANTOVÁ. Processing and Microstructure of As-Cast Ti-45Al-2W-xC Alloys.
Materials. BASEL: MDPI Open Access Publishing, 2022,
15(14), p. nestránkováno. ISSN 1996-1944.
[Detail] NOVÁK, Vlastimil, Lenka ŘEHÁČKOVÁ, Petra VÁŇOVÁ, Michal SNIEGOŇ, Dalibor MATÝSEK, Kateřina KONEČNÁ, Bedřich SMETANA, Silvie ROSYPALOVÁ, Markéta TKADLEČKOVÁ, Ľubomíra DROZDOVÁ and Petr KLUS. The Effect of Trace Oxygen Addition on the Interface Behavior of Low-Alloy Steel.
Materials. Basilej: MDPI Open Access Publishing, 2022,
15(4), p. nestránkováno. ISSN 1996-1944.
[Detail] ČECH BARABASZOVÁ, Karla, Aleš SLÍVA, Gabriela KRATOŠOVÁ, Sylva HOLEŠOVÁ, Anastasia VOLODARSKAJA, Tugrul CETINKAYA, Silvie BROŽOVÁ, Libor KOZUBEK and Gražyna SIMHA MARTYNKOVÁ. Phase Transformation after Heat Treatment of Cr-Ni Stainless Steel Powder for 3D Printing.
Materials. MDPI Open Access Publishing, 2022,
15(15), p. nestránkováno. ISSN 1996-1944.
[Detail] MĚSÍČEK, Jakub, Tomáš ČEGAN, Phu MA QUOC, Radim HALAMA, Kateřina SKOTNICOVÁ, Jiří HAJNYŠ, Jan JUŘICA, Pavel KRPEC and Marek PAGÁČ. Effect of artificial aging on the strength, hardness, and residual stress of SLM AlSi10Mg parts prepared from the recycled powder.
Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing. Lausanne: Elsevier Science SA, 2022,
855(143900), p. nestránkováno. ISSN 0921-5093.
[Detail] GABOR, Roman, Ladislav CVRČEK, Martina DOUBKOVÁ, Václav NEHASIL, Josef HLINKA, Petr UNUCKA, Matěj BUŘIL, Adéla PODEPŘELOVÁ, Jana SEIDLEROVÁ and Lucie BAČÁKOVÁ. Hybrid coatings for orthopaedic implants formed by physical vapour deposition and microarc oxidation.
Materials and Design. Elsevier, 2022,
219(July), p. nestránkováno. ISSN 0264-1275.
[Detail] DRÁPALA, Jaromír, Hana RIGOULET, Silvie BROŽOVÁ, Jitka MALCHARCZIKOVÁ, Šárka LANGOVÁ, Jiřina VONTOROVÁ, Václav NÉTEK, Jaroslav KUBAC and Dominik JANACEK. Processing of Metal Waste-Sludge from the Galvanizing Plants.
Metals. BASEL: MDPI Open Access Publishing, 2022,
12(11), p. nestránkováno. ISSN 2075-4701.
[Detail] VODÁREK, Vlastimil, Gabriela ROŽNOVSKÁ, Zdeněk KUBOŇ, Anastasia VOLODARSKAJA and Renáta PALUPČÍKOVÁ. The Effect of Long-Term Ageing at 475 °C on Microstructure and Properties of a Precipitation Hardening MartensiticStainless Steel.
Metals. Basilej: MDPI Open Access Publishing, 2022,
12(10), p. nestránkováno. ISSN 2075-4701.
[Detail]